hussar11

I can remember wrapping my web gear around the out side of my hatch cover of my AVGP Cougar for years as the gunner and crew commanders hatches were not that big and it was easier to leave the gear out side. Just put the gear on, and grab your wpn, as you got off the vehicle.

Thanks, will do a work around.

Just tried to do some changes to a couple of old scenarios, Both use the same map Gagetown training area. When I tried to open them, One had a UTC of +8 hrs. and the other had -4 hrs. Both scenarios would NOT let me change the UTC setting. Setting was greyed out. Is this a bug or something new.

For me. The TAPV as a new vehicle, with the twin M-151 Protector RWS sys. and the ability to form 8 car troops instead of the 6 car limit we have now.

I was afraid that would be the answer. Oh Well, should be able to get one fairly cheap. Thanks Gibsonm

Just got a new laptop, a Lenovo G505s AMD A8-5550M APU with Radeon HD Graphics 2.10 GHz 6.00 GB Ram (5.20 GB usable) (can be upgraded to 16 GB) 500 GB hard drive 64-bit OS Win 8.1 Sim runs great on this, however I have to hold down 3 keys to change views or positions in vehs. FN + whatever F key + Crtl (next unit) Any suggestions.

Just got my card today, many thanks eSim

Tried the windowed screen, no luck. overwrote the options dat, nothing dropped all the graphics settings to zero or one, HAVE A PICTURE. Movement is a bit jerky, responce time to commands very slow. Will have to either A. get a new graphics card, or B. New system

Have downloaded and installed SB Pro PE 3.02 after uninstalling 2.654. Now whenever I try to run SB, I get a black screen for a view. Can hear engines running and radio voices, but can only see when looking out of gunners primary sight with thermal running. Have run both gunnery ranges, instant action, and some old senarios. My system HP Pavilion a1440n Windows XP Sp3 Pentium ® D CPU 2.80 GHZ 3.50 GB Ram (4 GB installed) NVIDIA GeoForce 7300 LE (updated drivers) DirectX 9.0c Am I missing something from the textures folder? HELP PLEASE!!! System seems to be crashing whenever I try to run one of the accompaning senerios

Just read the release notes. FV101 Scorpion included as a non-crew position vehicle. Should bring back many memories of the AVGP Cougar (Mowag 6X6 hull with a Scorpion turret). I spent over 20 years in the Cougars, first as a gunner, then as a commander. Give it a year or two, the Scorpion may get upgraded to fully playable, Hey a guy can dream can't he.

I'm using Win XP with Firefox and I got the same thing for a few days. have not seen it for about a week now.

Did a complete un-install before I loaded 2.640 Some of the new skins in the download section actually show two different Leo's. A Leo1A5DK and a Leo1A5DK-1

Have noticed in the mods and the textures that there are TWO Leo1A5's. First one listed as Leo1A5DK.dds , the second listed as Leo1A5DK-1.dds Is there two different leo1A5's now. As well in the mission editor when adding new units, the leo1A5dk is listed twice. Is this a misprint.

Ok what did I do wrong Have 9 img Iwanted to put with that post, but would only let me do 7 As well hadto do the img as attachments

Modable Unit call signs There are five sections to the changeable unit call signs set-up from top to bottom. 1. NAME This section has the name of the .cst that you are using. Each .cst that you use or make is and should be individually named As well there are five buttons in this section. a. OK This button selects what you have listed below and applies it to the scenario b. CANCEL This button cancels what you have selected and leaves the set-up page. All call signs (c/s) stay as per the last set-up c. IMPORT… This button brings the .cst settings from the export folder. The export folder can normally be found here C:\Documents and Settings\your computer\My Documents\eSim Games\Steel Beasts\export d. EXPORT… This button saves what you have selected from the pull-down lists in the four sections below as a .cst in the export folder. The .cst should be individually named so you can import it from the export folder for use in another scenario at a later time. e. REMOVE This button removes the .cst from the export folder. http://www.steelbeasts.com/sbforums/attachment.php?attachmentid=9666&stc=1&d=1326054608 2. APPLY IF This section allows you to pick which company’s you want to change the c/s. With this you can use multiple .cst for the scenario I.E. In the first .cst you would select from the pull-down list 1 == company== 4 this would change only the company’s listed from 1 to 4 in the Call Signs symbols section In the second .cst you would select from the pull-down list 5 == company== 8 this would change only the company’s listed from 5 to 8 in the Call Signs symbols section With this you can change one company or all the company’s in a scenario The same applies for the platoon’s NOTE: There are ONLY 15 Company’s per BLUE side / RED side, not 16 as listed in the Call Signs symbols section http://www.steelbeasts.com/sbforums/attachment.php?attachmentid=9667&stc=1&d=1326054608 3. TEXT CALL SIGN This section sets up how a unit is listed in the text area in the bottom left of your screen There are three levels of how a unit can be listed in the text area a. Platoon b. Section c. Team Each of these has a number of pull-down lists from 2- 4 The pull-down lists have COMPANY, PLATOON, SECTION, and TEAM Depending on where the pull-down list is you may not have all four choices. As well you have open blocks between each pull-down list where you can place individual marks or symbols I.E. - ^ / \ : # * This section I haven’t played with much so I normally ignore it. http://www.steelbeasts.com/sbforums/attachment.php?attachmentid=9668&stc=1&d=1326054608 4. MAP CALLSIGN This section sets up how a unit is displayed on the map (F5) of your screen There are three levels of how a unit can be displayed on the map. a. Platoon b. Section c. Team Each of these has a number of pull-down lists from 3 - 5 The pull-down lists have MAP ICON, COMPANY, PLATOON, SECTION, and TEAM Depending on where the pull-down list is you may not have all five choices. The MAP ICON is the basic map symbol for that unit at platoon, section, team levels. You can have something displayed on both sides of the map icon depending on where you place MAP ICON in the pull-down lists I.E. PLATOON, MAP ICON, COMPANY would list what platoon from the CALL SIGNS SYMBOLS section to the left of the map icon and the company to the right of the icon http://www.steelbeasts.com/sbforums/attachment.php?attachmentid=9669&stc=1&d=1326054608 Platoon 1, icon, company B As well you have open blocks between each pull-down list where you can place individual marks or symbols I.E. - ^ / \ : # * Platoon level http://www.steelbeasts.com/sbforums/attachment.php?attachmentid=9670&stc=1&d=1326054608 platoon, icon, company Section level http://www.steelbeasts.com/sbforums/attachment.php?attachmentid=9671&stc=1&d=1326054608 platoon – section, icon, company Team level http://www.steelbeasts.com/sbforums/attachment.php?attachmentid=9672&stc=1&d=1326054608 platoon – section, team, icon, company For these examples, this is how you would be set 5. CALL SIGN SYMBOLS This section sets up how you want your units called by COMPANY, PLATOON, SECTION, TEAM As well there is a CO and XO spot where these two can have their own designation. The four lists are numbered 1-16 NOTE: There are ONLY 15 company’s per BLUE side / RED side, not 16 as listed in the Call Signs symbols section so only company’s 1- 15 will be displayed Each of these lists can be done as numbers, letters, symbols This set-up can be used for both the BLUE side and the RED side