Spall Liner: Difference between revisions

From SBWiki
Jump to navigation Jump to search
m (Protected "Spall Liner" [edit=sysop:move=sysop])
(No difference)

Revision as of 22:38, 27 July 2009

NASA test footage of spall generated from a small projectile traveling at 7000 m/s impacting on aluminum plate.

Kevlar is a common composite material used in the west as „spall liners“. Kevlar offer less resistance to AP shot compared to Fiberglas but comparable figures for APFSDS and HEAT. Not as good as Steltexolites but lighter at just ¾ of the density, it’s a good solution as a spall liner. The effect of spall is like a ‘small grenade’ going off inside the AFV, with the addition of spall liners this is reduced to a ‘shot gun blast’ [50% reduction in particles and blast cone]. Newer materials like ‘Spectra Shield’ and ‘Dyneema’ achieve the same effect but at 2/3 the weight of Kevlar. Dyneema is of note as being the liner in German AFVs, and has comparable resistance to Fiberglas at 1/3 the density.(Armor Technology, Paul Lakowski)

Gameplay effects

Demonstration of spall effects with (right) and without (left) spall liners.

In Steel Beasts, spall liners are factored into the damage models. This is important to keep into consideration, since these vehicles will be harder to kill by design. Spall liner essentially minimizes the effects of spall which, in its current representation in the simulation, greatly reduces the chance of indirect crew damages. This means that penetrating hits on vehicles with spall liners, will have much lower probabilities of indirect crew damages (direct damage to the actual crew members are unchanged) from spall as opposed to vehicles that do not have spall liners.

The damage model in Steel Beasts is detailed enough that spall liners are actually present, meaning that just because a vehicle has spall liners does not mean it is present all over every inner surface on the model. Typical surfaces that do not have spall liners are roof, hull belly, mantlet and engine walls.

SB vehicles equipped with spall liners

Current vehicles in Steel Beasts that are equipped with spall liners:

Tanks

Leopard 2A5DK
Leopardo 2E
Strv 122

PCs

Bushmaster
BMP-2
CV 90/35 DK
CV 90/40-C
M2A2
M3A2
M113AS4
Pizarro