TSe419E Posted March 12 Share Posted March 12 I took the STRV 122 to the range last night to prepare for the mission today and had a couple of instances where the LRF acted oddly. At the fourth or fifth engagement I would lase the target and the range would flash on the numeric display and then immediately switch to the battle-sight range. After that I would be unable to get a proper lase with the range stuck at battle sight. I talked to another player today and he said he had the same issue with this tank on the tank range, as well. 0 Quote Link to comment Share on other sites More sharing options...
Lumituisku Posted March 12 Share Posted March 12 31 minutes ago, TSe419E said: I took the STRV 122 to the range last night to prepare for the mission today and had a couple of instances where the LRF acted oddly. At the fourth or fifth engagement I would lase the target and the range would flash on the numeric display and then immediately switch to the battle-sight range. After that I would be unable to get a proper lase with the range stuck at battle sight. I talked to another player today and he said he had the same issue with this tank on the tank range, as well. @TSe419E! Did you remember that STRV and 2E have this feature where it is possible to zoom out to low magnifigation on daysight. And that if you do.. then lazer doesn't work. And that lazer only works when daysight channel is on high magnification? Was that the problem? 0 Quote Link to comment Share on other sites More sharing options...
Lumituisku Posted March 12 Share Posted March 12 https://www.steelbeasts.com/sbwiki/index.php?title=Leopardo_2E#Daylight_Sight 0 Quote Link to comment Share on other sites More sharing options...
TSe419E Posted March 13 Author Share Posted March 13 1 hour ago, Lumituisku said: @TSe419E! Did you remember that STRV and 2E have this feature where it is possible to zoom out to low magnifigation on daysight. And that if you do.. then lazer doesn't work. And that lazer only works when daysight channel is on high magnification? Was that the problem? I was in thermal view the first time. The second time I'm pretty sure I was zoomed in. But, like I said, it flashed a new range before going back to battle sight and getting stuck. 0 Quote Link to comment Share on other sites More sharing options...
TSe419E Posted March 13 Author Share Posted March 13 6 hours ago, Lumituisku said: https://www.steelbeasts.com/sbwiki/index.php?title=Leopardo_2E#Daylight_Sight 4 hours ago, TSe419E said: I was in thermal view the first time. The second time I'm pretty sure I was zoomed in. But, like I said, it flashed a new range before going back to battle sight and getting stuck. After more investigation I was able to recreate the problem. Lumi was correct. If the day sight is set to wide angle, ie less magnification, and you switch to the thermal view to engage a target it will reset the range to battle sight when you lase even if you are in the higher magnification view of the thermal. I don't know if this is supposed to happen that way but at least it is known now that is how it is operating. 0 Quote Link to comment Share on other sites More sharing options...
Members Ssnake Posted March 13 Members Share Posted March 13 The laser uses the optical channel, and is therefore properly focused only in narrow field of view. If unfocused, no laser echo will be registered, hence the fire control system falls back to battlesight range. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.