Leopard 1A5 Manual range entry

[maddin]

Hello

How can you set the range manually if the laser doesn't work? According to the tutorial there should be a switch located in the upper left corner of the GPS (according to the german translation this switch should be in the lower left corner). Well, looking through the GPS I can't find any switch of whatsoever. In the interior view there are some switch but not is related to the range entry.

Thankful for any help

Martin

[Jartsev]

Hello

How can you set the range manually if the laser doesn't work? According to the tutorial there should be a switch located in the upper left corner of the GPS (according to the german translation this switch should be in the lower left corner). Well, looking through the GPS I can't find any switch of whatsoever. In the interior view there are some switch but not is related to the range entry.

Thankful for any help

Martin

Seems that tutorial are not updated with introduction of 3D interior. To enter range manually:

-switch to interior view

-find panel above EMES eyepieces and set switch ENTFERNUNG to the MANUELL position

-enter range value by rotating knob under ENTFERNUNG switch(you can use mouse wheel to do this)

Also you can enter range by typing value on your keyboard(do not use numpad!) then using sight view(but ENTFERNUNG switch must be set to MANUELL).

[Froggy]

Press F1 to seen the gunner station.

over head, there is the Ballistic pannel.

Put Entfernung switch on Manuell.

Select dist with the rotating knwob just under the previous switch.

Press F2 to swith to sight view and press triger

too late...

[Ssnake]

You can use the mouse wheel to operate the rotating knob. I find this a bit more authentic since the real knob is a rotation know too (and even has this rasterization like a mouse wheel). Shift+wheel changes values faster.