Jump to content
murkz

WebAdmin error

Recommended Posts

I can see the CM stick and open the CodeMeter control center.

If I try to run WebAdmin I get a page cannot be found error, either in chrome or internet explorer.

I have noticed that webadmin is trying to connect to the ip address of 1.3, my pc is on 1.60.

I have changed the address in chrome to reflect 1.60 but still no luck.

Any ideas?

Jeff

Share this post


Link to post
Share on other sites

Huh?

1.3 and 1.60 are no valid IP addresses.

Anyway, it may be that a firewall is active that prevents the communication of the CodeMeter executable on port 22350 (the default). You may want to whitelist the CodeMeter.exe in this case, or to open the port.

Share this post


Link to post
Share on other sites

Thank you for the reply Snake, for simplicity sake i shortened the ip address from, 192.168.1.3 and 192.168.1.60.

The firewall is open for the port as you suggested, I still have the same error.

I managed to share out my second license some time ago. Have I changed a setting in the webadmin that now prevents access, like the ip address?

Share this post


Link to post
Share on other sites

Which version of the CodeMeter runtime do you have, and have you maybe accidentally installed multiple versions of it on your computer?

You may want to use the Windows Tool "Add/Remove Programs" to check for related entries.

The latest runtime can be found here. Then start the CodeMeter Control Center, and perform a firmware upgrade (click the circular arrow, and follow the on-screen instructions).

Share this post


Link to post
Share on other sites

Again, thank you for the reply. I am going to change my static ip back to...3. I will report back if that fails

Share this post


Link to post
Share on other sites

I did have two installs of the codemeter software, I have now removed the old one.

I have also taken your advice and updated the firmware to 2.02

I still cannot connect via WebAdmin

2013-09-20 10:37:33: CodeMeter for Windows (B5.00.1077.504.32.150)

2013-09-20 10:37:33: Running on Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit

2013-09-20 10:37:33: Execution path: C:\Program Files (x86)\CodeMeter\Runtime\bin

2013-09-20 10:37:33: Found IPv4 address: 127.0.0.1 | 192.168.1.60

2013-09-20 10:37:33: Found IPv6 address: ::1 | fe80::4cb3:3f60:b70a:d80a%10

2013-09-20 10:37:33: Used Communication Mode: IPv6 IPv4 SharedMemory

2013-09-20 10:37:33: Used IP address: 192.168.1.3

2013-09-20 10:37:33: Used IP port: 22350

2013-09-20 10:37:33: Used CmWAN port: 22351

2013-09-20 10:37:33: Multicast server search: not available

2013-09-20 10:37:33: Run as network server: no

2013-09-20 10:37:33: Run as CmWAN server: no

2013-09-20 10:37:33: Run as system service: no

2013-09-20 10:37:33: Box Access: use direct access mode

2013-09-20 10:37:33: ERROR: The application can't bind to 192.168.1.3:22350.

2013-09-20 10:37:33: Trying to bind again.

2013-09-20 10:37:37: ERROR: An invalid network address was specified.

2013-09-20 10:37:37: Trying BindAddress 127.0.0.1 as fallback.

Here is my log.

Jeff

Share this post


Link to post
Share on other sites

I have it working now, as a work around I changed the ip in chrome to http://127.0.0.1:22350/ and it works.

Thank you for the prompt assistance Nils, as always excellent customer support.

Jeff

Edited by murkz

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...